AMF S-101 Service Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 66
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
1
8 m7 0 m
Released: 10/2013
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
B - MACHINE INSTALLATION
1. CONTENT OF CONSIGNMENT
1.1. If not stated otherwise, the consignment contains the following:
machine head
cardboard with accessories (specication in the Spare
Parts section 3-58)
thread stand dismantled
1
operator’s manual with Spare Parts list
stand dismantled with motor (if ordered)
1.2. When unpacking the machine, it is necessary to follow marks
placed on the wrapping.
WARNING!
Visible damaged of the consignment that happened during the shipment
must be immediately reported to the carrier. Check the content of the
consignment with the order. Possible impediments must be immediately
reported to the manufacturer. Later claims cannot be acknowledged!
2. SEWING HEAD INSTALLATION ONTO THE TABLE
2.1. Once you unpack the machine, install it onto its intended place. Follow the instructions in this service manual to
asamble the stand dismantled. The machine is supplited with a stand of a standard height. The recommended height
of the table is 780 mm measured from the oor.
For work while seated use a chair with adjustable height. The desk height can be adjusted by lifting it up once loose
the screws
5
. Tighten the screws rmly after the adjustment.
2.2. The stability is secured with the rear support
2
, that is operated with a hand screw
3
. Check the desk level.
2.3. Place the pubber cushions
4
, supplied in the standard accessory, onto, appropriate holes of the table.
2.4. Unpack the sewing head
6
, set it onto the rubber cushions
4
. To fasten the sewing head liseing the screws
7
, the steel washers
8
and the rubber cushions
9
, supplied in the standard accessory.
WARNING!
For rising the machine hold it by the case, not by the bedplate!
NOTE!
If not supplied with the machine a full instruction manual for assambling the manufacturer, order number 97.0104.0.020.
1-9
S-101.M
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 65 66

Comments to this Manuals

No comments