AMF S-101 Service Manual download pdf (Page 40)

REECE 105

03-0279-1-000

16,2 mm

D - MACHINE ADJUSTMENT

Released: 10/2013

E-mail: [email protected]; webside: amfreece.com

Phone: +420 582 309 146; Fax: +420 582 360 606

7. NEEDLE BAR HEIGHT

Turning the hand wheel on the right side of the machine, lower the needle bar

to the bottom position. Use the

gauge

(03.0279.1.000) to make an adjustment or another similar tool with checking point 15,85 mm from the

bottom surface for clamp plates.

- Loosen the collar screw

to lower the needle

- Loosen the collar screw

to lift up the needle

Set the other collar so that the needle bar does not have ascial play, but turns freely in the turning point. Tighten the

collar screws again.

WARNING!

It is recommended not to loosen the upper bearings. The manuifacturer adjusts the bearing in a way that the needle

tip is set onto the sewing mechanism axis – such setting eliminates the production variations of machines. Other

adjustment can damage parts of the sewing mechanism or break the needle.

S-101.M

1-34

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

No comments

AMF S-101 Service Manual Page 40